Ceiling mounting kit for the Jet AFS-1000B air filtration unit consisting of four lengths (approx 1.30m each) of flexible stainless steel wire with screw eyes and bolt-up crimps.
4 March 2014
Hard to imagine how this design could be worseAs you can see from the picture the fixing rings are closed, so you would suppose that these need to be screwed in to the ceiling first, and the wires threaded through the lugs on the machine afterwards. This would mean somehow supporting the machine at the required height while you connect the wires to it. Attaching the wires takes approximately forever because the clamps are really too small for the job - they do not bite on the wires until they are very firmly tightened, the nuts are only 5mm so are fiddly to do up, and the wire itself resists being bent and held in place. Because of this it is essential to get the finished lengths right as there is no easy adjustment once the machine is hanging.