This power nibbler fits into the chuck of a mains power drill and is capable of cutting sheet steel up to 2mm. For best results the drill speed should be in the range of 1500 to 3000 rpm. It works on the same punch and die system as a true powered nibbler, effectively removing tiny crescent-shaped pieces of waste in a continuous chain.If you want to cut aluminium, please use a cutting lubricant or soap. Some alloys are sticky and will clog the nibbler with waste. Cleverly, this nibbler is double headed, with the handle screwing over the head which is not in use, so when one die becomes worn, the handle can be swapped over and the other head brought into use. A spare punch and die are included within the steel storage box.
|Max Material Thickness||2 mm|