The Rider No. 80 cabinet scraper produces a clean even finish and is ideal when used to smooth difficult grain over large areas. Tightening the knob, behind the blade, causes a slight bow in the blade. This increases the bite and hence the thickness of shaving. The body of the No. 80 is a fine, grey, iron casting with a flat, machined base. The base measures 90mm(3-1/2") x 68mm(2-5/8"), the blade is 70mm(2-3/4") wide. Checked for consistent quality at Axminster and supplied in an attractive, foam lined, sturdy black box with an instruction booklet.
Rider planes only require the bare minimum of initial preparation. The blade is oil quenched, high carbon spring steel, hardened and tempered to HRC 63, and only requires a little honing before use. Every plane undergoes careful inspection in Axminster to ensure consistent quality. We are confident that Axminster Rider planes represent a good standard in traditional, quality plane manufacture and great value.
|Nett Weight||733 g (1lb 10oz)|
|Plane Blade Width||70 mm (2.3/4")|
|Plane Sole Length||68 mm|