- Home >
- Axminster Engineer Series Powerfeed SX4 230V
Axminster Engineer Series Powerfeed SX4 230V
|Feed Speed||100 mm/min to 300 mm/min (var)|
5 August 2016
Poor designI purchased this Power feed unit with my Sieg SX3 Mill, whilst the Sieg Mill is very well made and finished this power feed unit is neither well made nor well finished.
29 November 2012
X3 power feedAfter much faffing about I managed to get the power feed to work correctly. The instructions that came with it are very poor. They consist of 4 pages of poor translation, 2 pages of which kust inform you that 3 sizes of stops are supplied. No mounting instructions are included. I found out how to install it via google. The case has to be removed to access the mounting holes, when this is done it springs badly and trying to realign them is very awkward. Initially it would only work at full speed, this was due to a connector coming loose every time I put the case back on (the motor fills most of the case, the lead was barely long enough to fit round it). Eventually I had to superglue the loose connector together. Now it's up and running I'll have to wait and see how reliable it will be, control at lower feed speeds is a bit coarse but smooth enough.
26 June 2011
X3 power feed for X1I adapted this power feed to fit the X1. It is out of proportion but works very well, and I can recommend it.