The AT25FM comes on a welded stand whilst the main body of the morticer is cast iron. The strong heavy-duty construction gives the machine a 25mm capacity. A single handwheel controls both longitudinal and lateral table movement. This system makes controlling the movement a breeze and prevents the table from skewing. The table has a tall back fence, which has lateral stops at the rear for repeat morticing ; the machine also has a depth stop. The multiple position material clamp con accommodate different workpiece widths. The downfeed lever provides the correct leverage and good feedback as the cut progresses. A gas strut provides smooth downward travel of the headstock and also allows headstock "parking" in any position. This machine is well suited to the busy trade workshop and will provide many years of accurate and trouble-free service. It accepts chisels with either 1.13/16" or 13/16" shanks.
This machine was previously known as the ATM25.
|Chisel Stroke||125 mm|
|Lateral Table Movement||80 mm|
|Longitudinal Table Movement||400 mm|
|Max Chisel Size Hardwood||19 mm|
|Max Chisel Size Softwood||25 mm|
|Max Height of Timber||225 mm|
|Nett Weight||160 kg|
|Overall L x W x H||660 mm x 515 mm x 1,538 mm|
|Plug Fitted||UK 3 pin plug|