The Axminster AT315SB 315mm Saw Bench is a proven design robustly constructed largely from cast iron and heavy gauge sheet steel. It has large cutting capacities and is a good choice for the trade workshop. The 315mm blade gives a cutting depth of up to 100mm and is amply powered by a 3kW 1ph induction motor. The cast iron table gives great strength and rigidity as well as providing a smooth working surface. The rip fence is full length and is cam locked solidly onto rails at the front and back of the table. It also has a sliding sub fence to make rip work safer and is also provided with a micro positioning adjustment to ensure accurate measurement. A mitre fence slides in a choice of T-slot grooves in the table either side of the blade. Both the blade height and tilt controls have decently large handles, are conveniently located and lock in position.
The standard saw has a steel right hand side support table included, this gives 650mm cut to the fence, allowing full sized boards to be cut lengthways. A pressed steel feed-off table is also supplied. Dust extraction is provided on both the crown guard and under the blade for efficient dust control, an extraction air flow of at least 1,000m³/hr is recommended. A side access door is fitted to give easy access for maintenance. Supplied with an Axcaliber 60T TCT general purpose blade. Please note: a 16amp supply will be required, plug fitted. This machine is compact in size but ready for work in the home or light trade workshop.
Further options are available: (1) a kit of two cast iron extension tables that can be fitted either one each side or both to the right of the blade, complete with longer fence rails; (2) a fully functioning sliding table kit to allow large board materials to be cut. When both options are fitted this saw bench becomes a very versatile machine for most jobs in the workshop.
|Blade Diameter||315 mm|
|Blade Tilt||0° to 45°|
|Bore Size||30 mm|
|Dust Extraction Outlet||100 mm|
|Max Ripping Width||635 mm|
|Max Width of Cut with Fence||1,160 mm|
|Min Extraction Airflow Required||1,000 m³/hr|
|Nett Weight||215 kg|
|Overall L x W x H||2,030 mm x 840 mm x 865 mm|
|Table Size||800 mm x 870 mm incl side table|
|Table Size With Extensions||800 mm x 1,480 mm|
|Max Depth of Cut @ 45º||75 mm|
|Max Depth of Cut @ 90º||100 mm|