The AT150BS a sturdy and robust belt sander, fabricated from heavy gauge steel plate and cast iron components. Versatile, because the belt arm can be used in any position from horizontal to vertical. The whole belt arm pivots around a very large flange with a graduated scale and the outer end of the belt drive roller is supported in its own ball bearing assembly. Fitted with a very comprehensive guarding system that allows the operator to expose only the amount of sanding belt required, but still allowing very easy changes of the belts. This machine has a large cast iron sanding table, which tilts from minus 15° to plus 45° and gives great support. When used as a linisher in the horizontal mode, the guarding can be removed to expose the maximum amount of belt and a fixed work stop is provided. The close fitting guarding coupled with two 62mm dust outlets will give exceptional extraction when attached to a suitable fine dust collector. Uses standard 150 x 1,220mm abrasive belts, supplied with a quality Hermes belt.
This machine was previously known as the BS648.
|Abrasive Belt Size||150 mm x 1,220 mm|
|Belt Speed||750 m/min|
|Dust Extraction Outlet||2 x 62 mm|
|Nett Weight||50 kg|
|Overall L x W x H||757 mm x 480 mm x 787mm|
|Sound Power Level [Uncertainty K]||79 dB(A) [1.5 dB]|
|Table Size||310 mm x 160 mm|
9 December 2015
Good machineWe have five of these Belt sanders working well in five work shops. Had no problems with assemble. In with 30minutes had them out of boxes and running. A good machine when working with students.