High suction L class wet and dry extractor suitable for extracting softwood dusts like spruce, fir or pine as well as Corian dust. The powerful suction turbine (max 254 millibar) is combined with a semi-automatic filter cleaning system (SFC) that ensures consistently high suction power. The SFC is controlled via a button near the end of the elbow connector. The SFC also greatly prolongs filter life. The automatic start system allows for a power tool to be connected to the extractor so that, as soon as the tool is started, the extractor comes on and will continue for a short time after the tool is stopped, to allow for efficient extraction. The extractor can be used wet without changing the filter. The robust transport wheels are non-marking and the front ones are lockable. L-Boxx cases can be integrated into the top of the machine for storage and transport.
L class refers to the whole machine, not just the filter and is suitable for dusts with MAC values >1mg/m³.
Bosch dust extractors are designed for dust-free sanding in combination with both electrical and pneumatic machines as well as hand-sanding blocks. Please ensure that any dust extractor is suitable for the type of dust being collected before ordering.
Supplied with 3M hose, power tool adaptor, floor cleaning kit with 3 metal tubes and floor nozzle, crevice tool, elbow and L class cellouse flat pleated filter and disposable filter bag
|Airflow Volume||4,440 litre/min|
|Corded or Cordless||Corded|
|Max Capacity Dry||35 litre|
|Max Capacity Wet||19 litre|
|Max Capacity with Filter Bag||19 litre|
|Max Power Tool Rating||1,800 W|
|Model||GAS 35 L SFC+|
|Motor Power||1,200 W|
|Nett Weight||11.6 kg|
|Overall L x W x H||500 mm x 380 mm x 550 mm|
|Sound Pressure Level [Uncertainty K]||70 dB(A) [3.0 dB]|
|Vibration [Uncertainty K]||<2.5 m/s² [1.5 m/s²]|
|Plug Type||UK 3 pin plug|
10 March 2017
Excellent all round machineWe purchased this machine to accompany a Bosch DA sander and have found it to work perfectly, reducing airborne dust significantly.
22 November 2015
Great asset for the workshopBought this for use in my small workshop. I use it with my GCM8 mitre saw, Axminster table saw, Metabo orbital sander as well as for general cleaning up. When looking around for such a vac, I thought this one looked good but expensive. However, included in the price are a number of hose end adaptors that enables it to be easily switched from tool to tool and it does perform well., keeping the workshop clean. The semi auto filter cleaning works very well, keeping up the level of suction. As usual, delivery from Axminster was excellent.