The Festool DSC-AGC 18-125 FH cordless diamond cutting system enables you to cut ceramic tiles, roofing tiles and make separating cuts in concrete etc. Fitted with a 125mm diameter diamond disc this 18V cordless machine offers a depth of cut of 27mm.
Part of the Festool 18V family, with this machine’s intended use, it is important that your working environment is as clean as possible. For this purpose, dust extraction is particularly effective; connection to a suitable extractor results in over 95% efficiency. The blade guard has a connector for a hose of 27mm or 36mm diameter. The design of the blade guard gives a clear view of the cutting line, making following a marked line simple. In addition, the blade guard pivots backwards to allow cutting close into the corner.
The electronically controlled smooth start-up prevents any sudden jolt when switching on. The speed dial offers a choice of six settings to enable cutting in a variety of materials. Electronic speed control ensures the motor speed remains constant under load. The machine features recoil protection, in the event of a sudden speed reduction e.g. if the blade jams in a cut, the motor switches off immediately. The EC-TEC motor is fully enclosed and the electronics protected against dust ingress guaranteeing a long service life.
The Festool DSC-AGC 18-125 comes with a 125mm diamond disc, auxiliary handle, anti-scratch base, flanges and pin spanner.
This is a body only machine supplied without batteries or charger.
|Batteries Included||Body Only Tool|
|Battery Voltage||18 V|
|Bore Size||22.2 mm (7/8")|
|Corded or Cordless||Cordless|
|Disc Diameter||125 mm|
|Model||DSC-AGC 18-125 FH|
|Nett Weight||3.2 kg (with battery)|
|Sound Power Level [Uncertainty K]||97 dB(A) [3.0 dB]|
|Sound Pressure Level [Uncertainty K]||86 dB(A) [3.0 dB]|
|Spindle Thread||M14 x 2 mm|
|Disc Speed||4,500 - 8,500 rpm|
|Vibration [Uncertainty K]||<2.5 m/s² [2.0 m/s²]|