The ETS 150mm sander is eccentric in its action with minimal vibration for excellent working results. With a 5mm orbit it is suitable for intermediate to fine finishing, sanding wood, varnish, paint, fillers and plastic.
You can be assured of a faultless finish with step less speed preselection so you can choose the correct speed to suit the work, constant electronics for consistent speed under load and a sanding pad brake. Fitted with dual bearings that make them very durable and Plug it cable system.
The pad has the patented MULTI-JETSTREAM 2 principle that works using intake air and exhaust air to generate airflow transporting the sanding dust away from the pads surface so that the abrasive wears evenly without clogging as well as keeping the surface at a low temperature. The result is almost 100% dust extraction for an improved rate of material removal, a better finish and a healthy working environment. Made from MPE high tear resistant material the pad is also very durable.
Supplied with MULTI-JETSTREAM 2 sanding base (soft), sanding sheet, disposable dust bag and stacking Systainer® T-LOC SYS3 storage case.
|Corded or Cordless||Corded|
|Dust Extraction||27 mm Outlet|
|Nett Weight||1.8 kg|
|Orbit Diameter||5.0 mm|
|Pad Size||150 mm|
|Speed||6,000 - 10,000 rpm|
|Sound Power Level [Uncertainty K]||83 dB(A) [3.0 dB]|
|Sound Pressure Level [Uncertainty K]||72 dB(A) [3.0 dB]|
|Vibration Sanding [Uncertainty K]||5.0 m/s² [2.0 m/s²]|
|Motor Power||310 W|
19 November 2013
Excellent quality, balance and fit for purposeThe 150/5 has a 5mm vibration movement which is designed to remove more than its 3mm cousin (150/3). This was the first Festool product that I bought and it continues to serve me flawlessly after 5 years! The vibration is well cushioned for the operator and by choosing the correct sandpaper from Festool you can take rough surfaces down through the grits to a very fine finish even on hard woods.