Package deal comprises the Fuji Mini-Mite 5 Turbine Unit and the Fuji G-Xpc Gravity Spray Gun.
Fuji Mini-Mite 5 Turbine Unit
The Mini-Mite 5-stage Turbine develops approximately 9.5 PSI. This additional power allows you to apply heavier coatings and thicker viscosity finishes faster. It achieves optimum atomisation with all finishes, but particularly thick finishes and latexes. The time you spend preparing materials is much less.
In the Platinum systems, Fuji Spray has designed a unique method of removing any heat build-up from the turbine case. A heat dissipation box located at the rear of the case, results in much cooler running. The benefits of this cooler running unit mean a longer life for your turbine motor compared to standard turbines. The hot air dissipates evenly through specially designed ‘finger slots' effectively reducing noise levels to about half that found on standard turbines. There is no added hiss or loud whistling noise.
Supplied with 25ft hose with quick-connect, air control valve, viscosity cup, wrench and cleaning brush, manual and ‘5 for 5 Bonus Kit’. The ‘5 for 5 Bonus Kit’ special accessory package comprises a 1,800mm whip hose, wet film gauge, 19 piece spray gun cleaning kit, extra turbine filters and "Always Measure” Booklet – to record your material preparation and results.
Important: The Mini-Mite PLATINUM Series Turbines have different size filters to the other Mini-Mite Turbines.
Fuji G-Xpc Gravity Spray Gun
By popular demand the G-Xpc Gravity Spray Gun has been relaunched by Fuji.
The Fuji G-Xpc Gravity Spray Gun features a spray fan control knob to adjust the size of the fan from 3mm up to 300mm and any size in-between. The pattern control knob allows you to adjust to the exact size of the object you are spraying. A 400cc pressurised gravity cup is installed, with the Fuji tilt feature it allows the user to spay in any direction including upwards.
100% stainless fluid components, stainless springs, metal knobs and collar, an ergonomic handle that is always cool to the touch. No 'O' rings are used in its construction.
This is the ideal sized gun for projects such as inside cabinets, furniture, bath restoration and spray body tanning etc. 1.4mm Aircap Set is installed - perfect size for most fine finishing with lacquers, polyurethanes, latex, water based coatings and others. Can be used with all Fuji HVLP Turbines.
|Hose Length||7.6 m|
|Motor Power||1,500 W|
|Nett Weight||11 kg|
|Overall L x W x H||305 mm x 218 mm x 206 mm|
|Plug Fitted||UK 3 pin plug|