Package deal comprises the Fuji Q5 Platinum Turbine Unit with either the T70 suction or T75 gravity feed spray gun.
The Q5 Platinum Turbine with its powerful 5-stage motor produces approximately 9.5psi. The extra power allows for less thinning of viscous paints and achieves finer atomisation. The Q5 utilises the same patented noise reduction seen in Fuji’s other Q models. The result is the quietest 5-stage HVLP turbine on the market. A key feature is a Master Speed Control to offer you the ability to adjust the psi/cfm to the optimum needed to perfectly atomise your coating and reduce the overspray/bounceback to an absolute minimum.
Supplied with 7.6m Hose with Quick-Connect, 0.9m Heat Hose, Air Control Valve, User Manual, Viscosity Cup, Wrench and Cleaning Brush. In addition the Q5 includes the 5-for-5 Bonus pack comprising 1.8m Whip Hose, Wet Film Gauge, 19 pc Spray Gun Cleaning & Maintenance Kit with Lubricant, Extra Turbine Filter and an “Always Measure” Booklet.
Fuji Spray Guns
The Fuji T-Series Spray Gun features an exclusive side-mounted pattern control knob to adjust the size of the fan. This knob allows you to switch from a small to large pattern, or anywhere in between. The fan pattern is adjustable from 25mm to 380mm from a distance of 200mm. Both spray guns come with a 1.3mm needle and nozzle set-up. The gun body is CNC machined to aircraft tolerances. The light weight of the T-Series and easy-pull trigger means less fatigue for the operator. The T-75 Gravity Gun is assembled with a 600cc Nylon Cup, which provides a perfect seal, with no gasket required.
|Hose Length||7.6 m|
|Motor Power||1,500 W|
|Nett Weight||14.8 kg|
|Overall L x W x H||378 mm x 292 mm x 230 mm|
|Sound Pressure Level [Uncertainty K]||60 dB(A) [1.5 dB]|
8 September 2018
Fantastic spray turbineI was apprehensive about this unit after reading other reviews and YouTube videos regarding hoses melting, this has been overcome by Fuji having a metre of heater hose directly off the turbine before attaching to the regular 20’ hose. This unit is fantastic. I have the G-XPc gravity feed unit, I’ve sprayed with everything from vinyl paint, Matt, polyurethane varnis, water based varnish, oil based gloss paint, 2 pack lacquer, and automotive cellulose paints. It sprays superbly. The controls are very easy to adjust. The gun is easy to clean afte using. I did as another review suggested and got the kit of stair gaskets and tubing for the cup. If using anything that required hatch thinkers etc the rubber gasket on the cup soon becomes stretched by chemicals. Makes putting finish on projects faultless and fast.
14 May 2017
Fuji Q5Was a little apprehensive about purchasing this unit after reading previous reviews regarding melting hoses. Unit now comes with a grey hose with a heavy duty heat section, resulting in no hose issues even with a full days use.