Gripit fixings are unique plasterboard fixings, manufactured in the UK, that provide the perfect solution to this enduring problem. They are easy to position and fit, and provide a strong, secure fixing for most wall-mounted items. The design spreads the load over twice the diameter of the fixing ensuring the even distribution of any stresses over a wide area.
This trade pack features 25 of each of the 4 sizes plus 4 undercutting tools and 4 flat bits, so you’re ready whatever the size of the job.
Suitable for use in 9.5-15mm thick plasterboard, Gripit fixings are easy to fit. Mark the location, drill the hole using the recommended size flat bit and tap in the Gripit. If you are unfortunate enough to encounter double thickness plasterboard or dot and dab adhesive, the undercutting tool creates a recess for the Gripit wings to rotate.
25 X 15mm Gripit
25 X 18mm Gripit
25 X 20mm Gripit
25 X 25mm Gripit
1 X 15mm Undercutting Tool
1 X 18mm Undercutting Tool
1 X 20mm Undercutting Tool
1 X 25mm Undercutting Tool
1 X 15mm Flat Drill Bit
1 X 18mm Flat Drill Bit
1 X 20mm Flat Drill Bit
1 X 25mm Flat Drill Bit
GripIt provide the perfect fixing for each and every plasterboard installation. Take a look below to find out which colour GripIt your task needs.
TVs, boilers, kitchen cupboards and more...
Radiators, cabinets, small TVs and more...
Mirrors, shelves, bathroom fixtures and more...
Curtain rails, blinds, small shelves and more...
GripIt’s quick fix design make installations simple!
Drill a hole into the plasterboard with the correct size drill bit for your requirement.
Push the GripIt fixing into the hole and gently tap until the collar sits against the surface.
Using a flat screwdriver, turn the insert 90° clockwise to open up the wings at the back of the fix.