A very versatile sander with oscillating bobbin and fully tilting table ideal for all manner of finishing tasks in the workshop. The oscillating motion of the bobbin prevents burning of the work as well as spreading the wear along the length of the abrasive. The cast iron table can be tilted up to 45° to allow for sanding of angled surfaces. There is a 50mm dust outlet provided at the rear of the machine and the use of a fine dust extractor is strongly recommended. The JBOS-5 sander is best suited to workshop use and has fitted as standard an exceptionally efficient extraction hood for dust free sanding when used with a suitable extractor. Also available as an additional accessory is a 76mm diameter bobbin, which will require an accompanying table insert. Supplied with 50mm, 38mm, 16mm, 12mm and 6mm bobbins and 100 grit loadings.
|Dust Extraction Outlet||50 mm|
|Height of Bobbins||150 mm|
|Max Cap @ 90º||110 mm|
|Nett Weight||35 kg|
|Stroke Length||22 mm|
|Table Height||470 mm|
|Table Size||370 mm x 370 mm|
23 March 2017
Jet oscillating bobbin sanderI purchased this sander in December and have now used the machine for approximately 3 months. I have found this machine more than meets my requirements, it’s quiet, stable and almost vibration free. Changing the bobbins assembly and sanding sleeves is easy. I did purchase a number of alternative (cheaper) sanding sleeves, however, they did not fit, so stick with the ones available from Axminster. This machine makes an excellent partner for my 300mm disc sander, almost every item I make is fine-tuned with at least one of the two sanders. Good quality piece of equipment would definitely recommend this machine if you’re looking for an oscillating bobbin sander.
16 August 2016
bobin sander JBOS - 5I HAVE NOW HAD THIS FOR SOME 8 MONTHS NOW, SO NOW ITS TIME TO REPORT, IT IS A VERY USEFULL BIT OF KIT AND THE FINISH YOU CAN GET ON YOUR CURVED CUTS IS OUT OF THIS WORLD. I MAKE TOYS SO THE FINISH IS EVERY THING
10 June 2016
Does the job well.I've been a trained violin maker for 20 years and I appreciate quality tools, this machine fits a small workshop very well and is made to last.
17 September 2015
JET JBOS-5 Oscillating Spindle MachineHello,
23 August 2015
Changing the spindlesPut the bigger rubber spindles in the freezer for 15 to 30 minutes its easy to get off and on, pass this tip on