The Le-matic PD80 Edgebanding Trimmer is designed for safe, straightforward operation. Beyond simple edgeband trimming, this tool is ideal for hollow door or column edge trimming and makes for a solid addition to any professional or hobbyist's collection of tools.
Safe, Effective, Straightforward Operation
Ergonomic Controls: two holding knobs allow for stable and strain-free operation of the edgeband trimmer during operation.
The motor spins at 30,000rpm, providing the power and durability to trim various materials such as wood, PVC and melamine, or laminate edgebands or edge tape.
More Than Just Edgebands: not limited to trimming edgebands or edge tap, the PD80 Edgeband Trimmer is also ideal for hollow door or column edge trimming.
Keeping Clean: a 180° telescopic cover assists in the collection of dust from the trimmings. A standard vacuum hose must be connected to the PD80 to use the dust collection function.
…While Keeping Safe: the cover also acts as a safeguard to keep the router bit separated from the operator. During operation, the vacuum cover shifts position according to the contours of the workpiece, allowing for interference-free trimming.
The PD80 Edgebanding Trimmer: a trimmer tool that combines functionality, safety and customisation.
|Corded or Cordless||Corded|
|Fine Height Adjuster||Standard Equipment|
|Motor Power||450 W|
|Nett Weight||2.3 kg|
3 February 2018
Okay but not perfect.I found the foot plate to be too flexible meaning the depth of cut can vary. This either allows edgebanding to remain proud or worse you cut into the worksurface. I machined a new foot plate out of 10mm thick acetal that goes closer to the bit to elliminate deflection. The dust extraction hood, whilst good, is I find, too deep to allow unimpeded movement when routering around corners.