Here is everything you have ever wanted in a filler. Osmo Woodfiller is a non-acrylic, water-based wood putty and filler. It sands easily once dry. The drying time is approximately 30 minutes at room temperature. It is non-flammable and non-toxic with no fumes or unpleasant odours. It will not crack, shrink, sink or fall out. It is quick to apply using a filling or palette knife or similar tool. It is easy to use in a wide range of repair and renovation projects. Osmo filler is available in a range of colours, ready to use straight from the tub with no need to mix or add additional hardener. Use this product to fill wood, plywood, masonry, fibreglass, plastic and metal.
|Pack Size||250 g|
24 June 2017
Easy to use water-based fillerI bought this filler to fill small gaps in some Oak display cases between the frame and a mitered moulding that was applied to the perimeter. I had previously been using sawdust mixed with PVA glue, but the PVA did not sand or take the Dark Oak stain up well, I also needed something to use as a grain filler for small areas that has 'shakes' in the surface that were difficult to remove. I had also tried filler sticks but these did not set hard enough for my liking.
23 May 2017
Very useful productLight oak matched my timber well but to be safe I mixed sanding dust with it for an almost perfect match. It sanded very well and accepted stain perfectly. Now, finished with Polyvine wax satin, I can't find the repairs. Brilliant!