The Proxxon FSB240/E is perfect for jewellers, mechanics, model builders, opticians, electronic enthusiasts and professionals. Can be used for prolonged periods when drilling, milling, die grinding, polishing, cleaning and engraving. This 100W multi-tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories.
|Chuck Capacity||0.3 mm to 3.2 mm|
|Corded or Cordless||Corded|
|Motor Power||100 W|
|Nett Weight||0.45 kg|
|Sound Pressure Level [Uncertainty K]||70 dB(A) [3.0 dB]|
|Speed||5,000 - 20,000 rpm|
|Vibration [Uncertainty K]||<2.5 m/s² [1.5 m/s²]|
19 March 2018
A very good tool - however it would benefit from a cut out device.I had this tool for approximately 4 years, however it only had intermittent light use. Recently, the motor and circuit board failed during slightly longer use use, and had to be replaced. The tool is now operational again, however I have lost confidence in the tool. I believe that the tool could benefit from a cut out device to prevent the tool from over heating.