The lower part of the motor unit and the baseplate is made of sturdy die-cast aluminium with CNC milled guides. The baseplate is surface milled and fitted with an integral vice to ensure work pieces are held firmly and securely for maximum cutting accuracy. The vice cheeks are provided with V-groove (for round parts) and with groove for clamping thin workpieces up to 65 mm wide. The compact, tight and torsion-free design allows clean and safe cutting of workpieces up to 65mm wide and 25mm thick as well as round material up to a maximum. diameter of 25mm. The baseplate rotates through 45° left and right and is notched 15° steps, the base can also be locked for intermediate angles. Supplied with a carbide tipped saw blade for wood, non-ferrous metals and plastic with 24 teeth ( 80 x 1.6 x 10 mm).
|Corded or Cordless||Corded|
|Max Depth of Cut @ 90deg||25 mm|
|Motor Power||200 W|
|Nett Weight||6 kg|
17 April 2017
Compact and works reasonably well; needs bringing into 21st centuryI can't say that I'd shout about this one from the rooftops, but so far it has served me well for small cuts.
15 March 2017
Why would one write the review after 6 yearsHi, this is review for KG50 driving belt and pulley same as KGS80. mine didn't last for a month belt worn out pulleys worn out and I am surprized to see " Billie Achilleos" made the effort to write the review after 6 years. nothing else to do
20 October 2016
Reliable Little Work HorseThis was the first bench tool I bought out of Uni. One of my employers had one that had lasted him and we found no fault in it. I bought my own and it's never let me down. I use it to cut box, T section and Tube aluminium mainly as well as flat lengths of ali and wood. Adjusting the angle is easy and acurate and locks in position tightly, it also clamps your material in place. The guard protects your fingers too without getting in the way of what you're doing. I have mine screwed to a piece of wood and hung on the wall when it's not in use so it's easy to just plug in and cut. I can't fault this product. It will cut up to 25mm box section comfortably. Mine is now 6 years old and as good as the day I bought it.