Swan have been making compressors since 1956. Specialising in making oil free, low noise compressors, the innovation in their design meets the strict requirements for compressed air purity required by many applications.
The twin cylinder combined motor and pump design is made from top quality components and is highly reliable. Motor protection from heat and over current is standard . The efficient air filter design reduces noise, while rubber mounting blocks reduce vibration. Its noise level is certainly not going to disturb your neighbours.
The pressure switch has a lever style switch and is adjustable for upper pressure and cut-in pressure (instruction for this inside switch cover), invaluable when you require a constant air pressure to be delivered. A receiver pressure gauge is fitted. The receiver is epoxy coated on the inside to prevent corrosion, and is of the space-saving, upright design with twin grab handles for easy mobility. Receiver inspection plugs and a large water drain tap are fitted. The compressor stands on soft rubber feet.
This compressor would be equally suitable for home use, craft, demonstrations or in a laboratory, school, upholstery or furniture workshop, or any application where a clean, regulated compressed air supply is required.
|Free Air Delivered||@1 bar - 99.97 l/m (3.53 cfm), @5 bar - 90.06 l/m (3.18 cfm), @7 bar - 80.43 l/m (2.84 cfm)|
|Max Pressure||145 psi (factory setting 110 psi)|
|Nett Weight||31 kg|
|Overall L x W x H||400 mm x 340 mm x 800 mm|
|Receiver Volume||30 litre|
|Sound Power Level [Uncertainty K]||66 dB(A) [1.5 dB]|
Benchmark scenic construction
2 October 2018
Failed at a yearThis compressor failed 10 days out of its year warranty. Axminster unwilling to rectify. Poor service.
2 January 2017
so quietI bought a compressor about 6 weeks ago a direct drive jobbie, and did the job but was so noisy I was frightened to turn it on, solid a lot of research and axminster had just got these in, so I bought one, I can't tell you how quiet it is, just amazing, I use it for airbrushing and spraying pushbikes, and when I put the primer on I use a full size 1.4 nozzle spray gun, and it works just fine, cannot recommend it enough, for the price nothing to touch it