The Swan SVP range of compressors are built to give many years of service, and are able to supply stable compressed air to many kinds of air driven tools and machinery. Swan have been making air compressor equipment for almost 40 years and are key suppliers for many top machinery manufacturers. The range features air cooled, cast iron, oil lubricated, slow running pumps, with highly efficient and durable valve sets which are driven by a top quality brand of electric motor. All the exterior surfaces are powder coated for long term protection. The receiver has large inspection ports to make the annual inspection much easier. The pump units are high capacity, low speed units, able to generate high volumes of compressed air without overheating or suffering undue stress. These units are fitted with adjustable pressure cut-out switches; you can adjust both the cut-in and cut-out pressures which is useful to create a narrow band of receiver pressure. A set of cast iron wheels allows some mobility or, by removing the wheels, you can bolt the compressor to the floor for a permanent installation.
This model is powered by a 3.7kW 415V 3ph motor and has a receiver capacity of 155 litres.
These compressors have a duty cycle of 50%. To select the correct machine, you should consider the predicted air volume required, plus allow 30% for an appropriate duty cycle. An allowance for an increase in future demand such as automation equipment should also be considered.
These compressors have that old fashioned " it will run forever" feel about them, just hearing them run fills you with confidence.
Please note, 16A 415V 3ph supply is required.
|Free Air Delivered||@1 bar - 804.29 l/m (28.40 cfm), @5 bar - 699.50 l/m (24.70 cfm), @7 bar - 631.54 l/m (22.30 cfm)|
|Max Pressure||115 psi|
|Nett Weight||168 kg|
|Overall L x W x H||1,500 mm x 450 mm x 900 mm|
|Receiver Volume||155 litre|
|Supply Requirements||415 V 3ph 16 A|
|Sound Power Level [Uncertainty K]||77 dB(A) [1.5 dB]|