Transferring a line from face side of timber to face edge and vice versa is now as easy as falling off a log. With this saddle square the line can be marked in both planes without moving the square hence maintaining prime accuracy without really trying. Produced in anodised aluminium to a practical but stylish design, and available in two sizes. One at 50mm wide, (the standard), forms an "L", of 32 x 57mm, the large version 34 x 84mm and 38mm wide has a central slot for locating and marking stud locations accurately.
|Model||05N5601 & 05N5610|
21 October 2018
Very versatileThis is one of those devices which you wonder if you would ever use, then once used it becomes indispensable. Not only does it mark face an edge in one go it also allows transfer of face mark to the other side with speed and accuracy, a frequent need. Plus its Veritas quality, everyone needs one (or both).
27 February 2016
Absolutely essentialAll Veritas spirit in a small piece of aluminium. Not only very useful, accurate and beautiful : it's a charm to handle. How I did without it all these years ???!!!
12 September 2013
Great productI've had the standard one for over a year now, used every time I go into the workshop. Very high quality finish and super accurate, makes marking across faces on stock simple and as a general layout square for edge work or on smaller stock. Once you have one I guarantee you will use it every day.